Power Conversion Efficiency Research Articles

One-Stone-for-Two-Birds Method to Improve the SnO2 Layers for High Power-per-Weight Flexible Perovskite Solar Cell Mini-modules.

Maintaining the power conversion efficiency (PCE) of flexible perovskite solar cells (fPSCs) while decreasing their weight is essential to utilize their lightweight and flexibility as much as possible for commercialization. Strengthening the interfaces between functional layers, such as flexible substrates, charge transport layers, and perovskite active layers, is critical to addressing the issue. Herein, we propose a feasible and one-stone-for-two-birds method to improve the electron transport layer (ETL), SnO2, and the interface between the ETL and perovskite layer simultaneously. In detail, poly(acrylate ammonium) (PAAm), a low-cost polymer with a long chain structure, is added into the SnO2 aqueous solution to reduce the aggregation of SnO2 nanoparticles, resulting in the deposition of a conformal and high-quality ETL film on the tin-doped indium oxide film surface. Simultaneously, PAAm addition can effectively regulate the crystallization of the perovskite films, strengthening the interface between the SnO2 film and the buried surface of the perovskite layer. The outstanding PCEs of 22.41% on small-scale fPSCs and 18.54% on fPSC mini-modules are among the state-of-the-art n-i-p type fPSCs. Moreover, the fPSC mini-module on the 20 μm-thick flexible substrate shows a comparable PCE with that of the fPSC mini-module on the 125 μm-thick flexible substrate, exhibiting a high power-to-weight of 5.097 W/g. This work provides an easy but essential direction for further applications of fPSCs in diverse scenarios.

Work Function Tuning of Carbon Electrode to Boost the Charge Extraction in Hole Transport Layer-Free Perovskite Solar Cells.

Perovskite solar cell (PSC) is a promising photovoltaic technology that achieves over 26% power conversion efficiency (PCE). However, the high materials costs, complicated fabrication process, as well as poor long-term stability, are stumbling blocks for the commercialization of the PSCs in normal structures. The hole transport layer (HTL)-free carbon-based PSCs (C-PSCs) are expected to overcome these challenges. However, C-PSCs have suffered from relatively low PCE due to severe energy loss at the perovskite/carbon interface. Herein, the study proposes to boost the hole extraction capability of carbon electrode by incorporating functional manganese (II III) oxide (Mn3O4). It is found that the work function (WF)of the carbon electrode can be finely tuned with different amounts of Mn3O4 addition, thus the interfacial charge transfer efficiency can be maximized. Besides, the mechanical properties of carbon electrode can also be strengthened. Finally, a PCE of 19.03% is achieved. Moreover, the device retains 90% of its initial PCE after 2000 h of storage. This study offers a feasible strategy for fabricating efficient paintable HTL-free C-PSCs.

SnSe2 Quantum Dots and Chlorhexidine Acetate Suppress Synergistically Non-radiative Recombination Loss for High Efficiency and Stability Perovskite Solar Cells.

Non-radiative recombination losses limit the property of perovskite solar cells (PSCs). Here, a synergistic strategy of SnSe2QDs doping into SnO2 and chlorhexidine acetate (CA) coating on the surface of perovskite is proposed. The introduction of 2D SnSe2QDs reduces the oxygen vacancy defects and increases the carrier mobility of SnO2. The optimized SnO2 as a buried interface obviously improves the crystallization quality of perovskite. The CA containing abundant active sites of ─NH2/─NH─, ─C═N, CO, ─Cl groups passivate the defects on the surface and grain boundary of perovskite. The alkyl chain of CA also improves the hydrophobicity of perovskite. Moreover, the synergism of SnSe2QDs and CA releases the residual stress and regulates the energy level arrangement at the top and bottom interface of perovskite. Benefiting from these advantages, the bulk and interface non-radiative recombination loss is greatly suppressed and thereby increases the carrier transport and extraction in devices. As a result, the best power conversion efficiency (PCE) of 23.41% for rigid PSCs and the best PCE of 21.84% for flexible PSCs are reached. The rigid PSC maintains 89% of initial efficiency after storing nitrogen for 3100 h. The flexible PSCs retain 87% of the initial PCE after 5000 bending cycles at a bending radius of 5 mm.

Equally Efficient Perovskite Solar Cells and Modules Fabricated via N-Ethyl-2-Pyrrolidone Optimized Vacuum-Flash.

Efficiency reduction in perovskite solar cells (PSCs) during the magnification procedure significantly hampers commercialization. Vacuum-flash (VF) has emerged as a promising method to fabricate PSCs with consistent efficiency across scales. However, the slower solvent removal rate of VF compared to the anti-solvent method leads to perovskite films with buried defects. Thus, this work employs low-toxic Lewis base ligand solvent N-ethyl-2-pyrrolidone (NEP) to improve the nucleation process of perovskite films. NEP, with a mechanism similar to that of N-methyl-2-pyrrolidone in FA-based perovskite formation, enhances the solvent removal speed owing to its lower coordination ability. Based on this strategy, p-i-n PSCs with an optimized interface attain a power conversion efficiency (PCE) of 24.19% on an area of 0.08 cm2. The same nucleation process enables perovskite solar modules (PSMs) to achieve a certified PCE of 23.28% on an aperture area of 22.96 cm2, with a high geometric fill factor of 97%, ensuring nearly identical active area PCE (24%) in PSMs as in PSCs. This strategy highlights the potential of NEP as a ligand solvent choice for the commercialization of PSCs.

Counter-Doping Effect by Trivalent Cations in tin-based Perovskite Solar Cells.

Sn-based perovskite solar cells normally show low open circuit voltage due to serious carrier recombination in the devices, which can be attributed to the oxidation and the resultant high p-type doping of the perovskite active layers. Considering the grand challenge to completely prohibit the oxidation of Sn-based perovskites, a feasible way to improve the device performance is to counter-dope the oxidized Sn-based perovskites by replacing Sn2+ with trivalent cations in the crystal lattice, which however has been rarely reported. Here, we present the introduction of Sb3+, which can effectively counter-dope the oxidized perovskite layer and improve the carrier lifetime. Meanwhile, Sb3+ can passivate deep-level defects and improve carrier mobility of the perovskite layer, which are all favourable for the photovoltaic performance of the devices. Consequently, the target devices yield a relative enhancement of the power conversion efficiency (PCE) of 31.4% as well as excellent shelf-storage stability. This work provides a novel strategy to improve the performance of Sn-based perovskite solar cells, which can be developed as a universal way to compensate for the oxidation of Sn-based perovskites in optoelectronic devices. This article is protected by copyright. All rights reserved.

Impact of La doping on the optoelectronic and structural properties of CsPbIBr2 perovskite solar cell

Inorganic lead halide perovskite solar cells (IPSC) have high power conversion efficiency (PCE). Currently, heteroatom substitution is a promising method for enhancing the properties of perovskite materials and the performance of associated devices. This study outlines the production process of a perovskite solar cell made from inorganic CsPbIBr2 with a 4 % La doping. The cubic crystal structure with large grain size and small band gap energy is observed at 4 % La–CsPbIBr2. The optoelectronic and structural characteristics of CsPbIBr2 perovskite solar cells have been substantiated through various methodologies, such as the determination of space charge restricted current, examination of the photoluminescence decay profile, assessment of charge transfer resistance, and utilization of Mott Schottky analysis. The incorporation of lanthanum-doped cesium lead iodide bromide (La-doped CsPbIBr2) resulted in a notable enhancement in both the open circuit voltage (Voc), and the short circuit current density (Jsc), leading to a much higher overall efficiency of 9.89 % compared to the pristine counterpart, which exhibited an efficiency of 8.62 %.

Chlorinated Oligomers with Regulate Planarity Achieving Superior Photovoltaic Performance.

Chlorine substitution, as an effective and low-cost modification strategy, has been applied in the design of donor and acceptor structures in organic solar cells. We synthesized a series of chlorinated dimerized acceptors to investigate the effect of chlorine numbers and locations on the photovoltaic properties. The results show that the planarity and morphology of DYV-γ-2Cl are greatly improved due to the appropriate numbers and positions of the substituted chlorine atoms. Therefore, the device based on PM6:DYV-γ-2Cl achieves a superior power conversion efficiency (PCE) of 15.54% among the three oligomeric acceptors with optimized molecular planarity and film morphology. This work demonstrated the positive effect of suitable numbers and the substitution positions of chlorines on the molecular arrangement and photovoltaic properties of the corresponding dimerized acceptors.

Active Passivation of Anion Vacancies in Antimony Selenide Film for Efficient Solar Cells.

Binary antimony selenide (Sb2Se3) is a promising inorganic light-harvesting material with high stability, non-toxicity and wide light harvesting capability. In this photovoltaic material, it has been recognized that deep energy level defects with large carrier capture cross section, such as VSe (selenium vacancy), lead to serious open-circuit voltage (VOC) deficit and in turn limit the achievable power conversion efficiency (PCE) of Sb2Se3 solar cells. Understanding the nature of deep-level defects and establishing effective method to eliminate the defects are vital to improving VOC. In this study, we propose a novel directed defect passivation strategy to suppress the formation of VSe and maintaining the composition and morphology of Sb2Se3 film. In particularly, through systematic study on the evolution of defect properties, we reveal the pathway of defect passivation reaction. Owing to the inhibition of defect-assisted recombination, the VOC increases, resulting in an improvement of PCE from 7.69% to 8.90%, where is the highest efficiency of Sb2Se3 solar cells prepared by thermal evaporation method with superstrate device configuration. This study proposes a new understanding of the nature of deep-level defects and enlightens the fabrication of high quality Sb2Se3 thin film for solar cell applications. This article is protected by copyright. All rights reserved.

Establishing Co‐Continuous Network of Conjugated Polymers and Elastomers for High‐Performance Polymer Solar Cells with Extreme Stretchability

AbstractHigh power conversion efficiency (PCE) and mechanical robustness are prerequisites for wearable applications of organic solar cells (OSCs). However, stretchability of present active systems (i.e., crack‐onset strain (COS) < 30%) should be improved. While introducing elastomers into active systems is considered a simple method for improving stretchability, the inclusion of elastomers typically results in a decrease in PCE of the OSC with a limited enhancement in the stretchability due to lack of interconnected electrical and mechanical pathways. In this study, it is developed efficient and intrinsically stretchable (IS)‐OSCs with exceptional mechanical robustness, by constructing co‐continuous networks of conjugated polymers (D18) and elastomers (SEBS) within active layers. It is demonstrated that the blend film with a specific ratio (40:60 w/w) of D18:SEBS is crucial for forming co‐continuous structures, establishing well‐connected mechanical and electrical channels. Consequently, D180.4:SEBS0.6/L8‐BO OSCs achieve 16‐times higher stretchability (COS = 126%) than the OSCs based on D18/L8‐BO (COS = 8%), while achieving 4‐times higher PCE (12.13%) compared to the OSCs based on SEBS‐rich active layers (D180.2:SEBS0.8/L8‐BO, PCE = 3.15%). Furthermore, D180.4:SEBS0.6‐based IS‐OSCs preserve 86 and 90% of original PCEs at 50% strain and after 200 stretching/releasing cycles with 15% strain, respectively, demonstrating the highest mechanical robustness among reported IS‐OSCs.

Precursor-Engineered Volatile Inks Enable Reliable Blade-Coating of Cesium-Formamidinium Perovskites Toward Fully Printed Solar Modules.

Reliable fabrication of large-area perovskite films with antisolvent-free printing techniques requires high-volatility solvents, such as 2-methoxyethanol (2ME), to formulate precursor inks. However, the fabrication of high-quality cesium-formamidinium (Cs-FA) perovskites has been hampered using volatile solvents due to their poor coordination with the perovskite precursors. Here, this issue is resolved by re-formulating a 2ME-based Cs0.05FA0.95PbI3 ink using pre-synthesized single crystals as the precursor instead of the conventional mixture of raw powders. The key to obtaining high-quality Cs-FA films lies in the removal of colloidal particles from the ink and hence the suppression of colloid-induced heterogeneous nucleation, which kinetically facilitates the growth of as-formed crystals toward larger grains and improved film crystallinity. Employing the precursor-engineered volatile ink in the vacuum-free, fully printing processing of solar cells (with carbon electrode), a power conversion efficiency (PCE) of 19.3%, a T80 (80% of initial PCE) of 1000h in ISOS-L-2I (85°C/1Sun) aging test and a substantially reduced bill of materials are obtained. The reliable coating methodology ultimately enables the fabrication of carbon-electrode mini solar modules with a stabilized PCE of 16.2% (average 15.6%) representing the record value among the fully printed counterparts and a key milestone toward meeting the objectives for a scalable photovoltaic technology.

High-Throughput Roll-to-Roll Processed Large-Area Perovskite Solar Cells Using Rapid Radiation Annealing Technique.

The development of a stable roll-to-roll (R2R) process for flexible large-area perovskite solar cells (PSCs) and modules is a pressing challenge. In this study, we introduced a new R2R PSC manufacturing system that employs a two-step deposition method for coating perovskite and uses intensive pulsed light (IPL) for annealing. This system has successfully fabricated small-sized cells and the first-ever large-sized, R2R-processed flexible modules. A key focus of our work was to accelerate the conversion of PbI2 to perovskite. To this end, we utilized IPL annealing and incorporated additives into the PbI2 layer. With these modifications, the R2R-processed perovskite films achieved a power conversion efficiency (PCE) of 16.87%, representing the highest reported value for R2R two-step processed PSCs. However, these cells exhibited hysteresis in reverse and forward PCE measurements. To address this, we introduced a dual-annealing process consisting of IPL followed by a 2-min thermal heating step. This approach successfully reduced hysteresis, resulting in low-hysteresis, R2R-processed flexible PSCs. Moreover, we fabricated large-scale flexible modules (10 × 10 cm2) with a PCE of 11.25% using the dual-annealing system, marking a significant milestone in this field.

Efficient and Highly Stable Lateral Perovskite Single‐Crystal Solar Cells through Crystal Engineering and Weak Ion Migration

AbstractThe lateral device structure for perovskite solar cells (PSCs) has garnered significant attention, primarily due to its elimination of the need for expensive transparent electrodes. However, the performance of lateral devices, which are more sensitive to crystal quality and charge carrier transport bottlenecks, has lagged far behind the predominant vertical PSCs. Herein, by modulating the crystal nucleation and growth processes of thin FA0.75MA0.25PbI3 (FA = formamidinium; and MA = methylammonium) single crystals, crystal quality and carrier transport are improved, resulting in a power conversion efficiency (PCE) of 12.64%, a record for lateral PSCs. Investigation of the device's stability reveals that iodide ion migration is suppressed due to a reduction in the iodide vacancy concentration combined with weak interface iodide ion migration. It is shown that the latter effect is a result of the perpendicular direction of the ion migration and the electric field in the lateral PSCs. Consequently, these lateral single‐crystal PSCs display remarkable operational stability, retaining 100% of their initial PCE after 1200 h of steady‐state output at the maximum power point voltage (Vmpp) under 1 sun illumination. This work highlights the advantages of lateral single‐crystal devices and their potential to address key ion migration issues of PSCs.

Nanotechnology's potential in advancing renewable energy solutions

Nanotechnology has emerged as a promising frontier in the quest for sustainable energy solutions, offering transformative opportunities to address pressing challenges in renewable energy generation, storage, and conversion. This review explores the potential of nanotechnology in advancing renewable energy solutions, encompassing a wide range of applications spanning solar energy, wind energy, energy storage, and fuel cells. By leveraging the unique properties of nanomaterials, such as high surface area-to-volume ratio, tunable optical and electronic properties, and enhanced catalytic activity, researchers and engineers can develop innovative materials and devices with unprecedented performance and efficiency. Nanotechnology-enabled advancements in solar photovoltaics include the development of next-generation solar cells incorporating nanostructured materials, such as quantum dots, nanowires, and perovskite-based solar cells, to enhance light absorption, charge transport, and overall power conversion efficiency. In the realm of energy storage, nanomaterials hold promise for improving the performance and longevity of batteries, supercapacitors, and other energy storage devices through enhanced electrode materials, electrolytes, and nanostructured architectures. Furthermore, nanotechnology-driven innovations in wind energy, such as lightweight and durable nanocomposite materials for turbine blades, and advancements in fuel cell technologies, including catalyst nanoparticles for efficient hydrogen production and conversion, exemplify the diverse applications and transformative potential of nanotechnology in renewable energy. Through a comprehensive analysis of recent research and development efforts, this abstract underscores the critical role of nanotechnology in accelerating the transition to a sustainable and renewable energy future. Keywords: Nanotechnology, Renewable Energy, Solar Energy, Wind Energy, Energy Storage, Nanomaterials.

An Asymmetric Coumarin-Anthracene Conjugate as Efficient Fullerene-Free Acceptor for Organic Solar Cells.

Asymmetric wide-bandgap fullerene-free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin-anthracene conjugate named CA-CN with optical bandgap of 2.1 eV in a single-step condensation reaction. Single crystal X-ray structure analysis confirms various multiple intermolecular non-covalent interactions. The molecular orbital energy levels of CA-CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA-CN as acceptor and PTB7-Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA-CN as a third component in ternary OSCs with PTB7-Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7-Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high-efficiency OSCs at low cost.

Asymmetrical benzothiadiazole core-based hole transport materials for planar perovskite solar cell

For the purpose of fabricating high performance hole transport materials (HTMs) for n-i-p planar perovskite solar cells (PSCs), two asymmetric and one symmetric structured donor-acceptor-donor (D-A-D) type small molecules (a-BTC, a-BTBC and BTDC) were synthesized by introducing two different peripheral groups toward benzothiadiazole core. The a-BTBC with longer π conjugation lengths shows good film formation property, higher hole mobility and conductivity, and achieves power conversion efficiency (PCE) of 23.5 %. It can retain 80 % of the initial PCE after aging 30 days in an ambient condition with relative humidity of 40–60 %. Our results show the potential and provides reference for molecular design of asymmetric structured HTMs.

An Asymmetric Coumarin‐Anthracene Conjugate as Efficient Fullerene‐Free Acceptor for Organic Solar Cells

Asymmetric wide‐bandgap fullerene‐free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin‐anthracene conjugate named CA‐CN with optical bandgap of 2.1 eV in a single‐step condensation reaction. Single crystal X‐ray structure analysis confirms various multiple intermolecular non‐covalent interactions. The molecular orbital energy levels of CA‐CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA‐CN as acceptor and PTB7‐Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA‐CN as a third component in ternary OSCs with PTB7‐Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7‐Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high‐efficiency OSCs at low cost.

Improving perovskite solar cell efficiency and prolonging durability via interface modification with guanidinium iodide by post treatment method

The performance of perovskite solar cells (PSCs) can be significantly compromised by the presence of halide vacancies on the perovskite surface, leading to defects and a decline in stability and efficiency. Effectively addressing this challenge, the application of Guanidinium iodide (GAI) as a post dopant treatment (POST) has demonstrated success. GAI (POST) not only reduces surface defects but also minimizes halide deficiencies and mitigates losses due to interfacial charge recombination. When incorporating a GAI additive at a solution concentration of 1.5 mg/ml in the modification layer with the perovskite composition Cs0.1FA0.8MA0.1PbI3, the PSC showed a notable power conversion efficiency (PCE) of 20.7%, surpassing the 16.3% efficiency of the control device. Moreover, the adapted device demonstrated an impressive fill factor (FF) of 80.1%. Notably, the enhanced film of the modified device maintained over 80% of its initial efficiency for more than 312 h, highlighting the prospect of creating affordable, effective, and durable PSCs.

Homogenizing the Electron Extraction via Eliminating Low‐Conductive Contacts Enables Efficient Perovskite Solar Cells with Reduced Up‐Scaling Losses

AbstractMaintaining the power conversion efficiency (PCE) of perovskite solar cells (PSCs) while enlarging the active area is necessary for their industrialization, where the key part is the uniform carrier extraction. Here, a conformal electron transport layer (ETL) is reported with eliminated low‐conductive contacts through a tailored deposition that combines chemical bath deposition and modified spin‐coating on a light‐managing textured substrate. The KPFM and C‐AFM are utilized to prove the uniform and optimized electrical properties. This study further employs the 2D measurements of PL and TRPL mapping to focus on revealing the enhanced uniformity of electron extraction. The uniform ETL conductivity and electron extraction contribute to a substantial decrease in device up‐scaling losses, making the δPCE ( between 0.08 cm2‐device and 1 cm2‐device decrease from 5.02% to 2.97%, while the perovskite film is deposited using two‐step method. When using one‐step method to deposit perovskite film, PCEs of 25.13% and 23.93% for the active area of 0.08 cm2 and 1 cm2 are achieved, and the δPCE decreases from 7.89% to 4.77%, validating the significant effects on reducing up‐scaling losses. This work provides a new perspective to maintain high efficiency while device up‐scaling, providing more opportunities to push forward the PSCs industrialization.

“Exploration of Photovoltaic Behavior of Bithiophene-functionalized Dispiro-oxepine based Hole-transporting Materials for Efficient Perovskite Solar Cells”

Abstract Perovskite solar cells (PSCs) have got great attention from researchers due to their superior photovoltaic properties, high efficiency, and low cost. In this study, bithiophene dispiro-oxepine based five hole-transporting materials (DDOF1, DDOF2, DDOF3, DDOF4, and DDOF5) are designed by the substitution of end-capped acceptors via thiophene-based bridge to enhance the photovoltaic properties of PSCs. The results showed that designed HTMs have deeper HOMO levels (-4.88 eV to -5.04 eV), high solubility, and compatible stability with low band gaps (2.04 eV to 2.59 eV) than the reference molecule (EHOMO = -4.55 eV, Eg = -3.49 eV), which improved hole extraction and the open-circuit voltage in the PSCs. Moreover, the binding energy (0.41 eV to 0.46 eV) and TDM analysis indicated that DDOF1-DDOF5 HTMs have high charge mobility compared to the reference molecule DDOF (0.61 eV). The DDOF1-DDOF5 HTMs indicated anticipated high power conversion efficiency and open-circuit voltage than the reference molecule. Overall, our findings proved that designed molecules are efficient HTMs for the manufacture of high-efficiency PSCs in the solar industry.

Design of highly efficient 0D/1D TiO2 photoanode for dye-sensitized solar cells by simple TiCl4 pre-treatment of titanate nanotubes

Dye-sensitized solar cells (DSCs) represent a promising avenue for sustainable energy conversion, with the efficiency of these devices heavily reliant on the performance of the TiO2 photoanode. Despite significant advancements, optimizing the photoanode material for higher efficiency remains a challenge. This study introduces a novel approach to constructing a highly efficient, multifunctional 0D/1D TiO2 composite by simply pre-treating the TiO2 precursor, specifically one-dimensional (1D) H-titanate nanotubes, with TiCl4. The TiCl4 treatment not only encourages the extensive synthesis of the one-dimensional nanostructures (i.e., nanorods) but also facilitates the in situ hydrolysis to generate small crystals that attach to the surface of the nanorods. The TiO2 composite offers several essential benefits, including the expanded thickness, high surface area for superior dye adsorption, efficient diffuse light scattering induced by the aggregate structures, and fast charge transport within the film matrix, making it an exemplary component for DSCs. The photovoltaic performance test revealed that TiCl4 pre-treatment increased power conversion efficiency by 36.3 %, rising from 7.63 % of untreated cells to a striking value of 10.4 %, which is a new record when N719 is used as a sensitizer and iodide-based redox shuttle employed as an electrolyte. This research provides an effective strategy for developing highly efficient photoanode material for DSCs.